CH382 is a PCI-Express based dual-channel UARTs and printer port chipcontains Dual UARTs which compatible with 16C550 or 16C750, and a EPP/ECP enhanced bi-directional parallel port. The UART supports independently transmit and receive 256 bytes FIFO buffer. Supports IrDA infrared encode and decode, supports communication baud rate up to 8Mbps. It can be used for RS232 serial expansion, PCIe high-speed serial with automatic hardware speed control, serial networking, RS485 communications, parallel/ printer port expansion etc.
ef 232 parallel port driver download
The PCI2S1P PCI Serial/Parallel Combo Card turns a PCI slot into two external 16C550 serial ports and one external EPP/ECP parallel port - an all-in-one solution that gives you both parallel and serial connections while taking up only one PCI slot.
The serial/parallel combo card is PCI plug and play ready and supports IRQ sharing for fast, simple installation. The combo card is supported in virtually any Microsoft Windows operating environment (Windows 7, Server 2008 R2, Vista, XP, ME, 2000, 98, 95 and NT4), and is backed by a StarTech.com Lifetime Warranty and free lifetime technical support.
Use a different serial or parallel cable, serial or parallel port, and serial or parallel device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
Make sure that the COM or LPT port number is the correct number for the serial or parallel device and that the software being used to connect the computer to the serial or parallel device uses the correct COM or LPT port number.
Introducing the industry's most featured add-on 2 serial (16950) + 1 parallel (EPP/ECP compatible) adapter for PCI Express. This cutting edge design permits a quick installation of 2 of RS232 serial + 1 of parallel port to any brand of computer system with a PCI Express expansion slot. Support is provided for Microsoft Windows 9x, ME, 2000, XP, XP64, NT4, 2003-32 bit, 2003-64 bit, QNX, OS/2 Warp 4.0, Vista 32/64 and Linux. Furthermore, Linux users will welcome the ease of installation of this advanced card by not having to recompile kernels, without embedding add-on device drivers, without inserting add-on modules. The Axxon LF719KB card is Plug & Play supported by all current Linux kernels. Count on Axxon to provide unrivalled no-charge toll-free (US/Canada) technical support by Design Engineers. Find out today why we are the #1 choice of international OEMs for PCI, PCI-X and now PCI Express designs. We welcome requests from volume integrators world-wide.
The utilities page contains useful programs that provide extended capabilities for application development and manufacturing support. Engineers should take care to validate output from these utilities. Extreme vigilance should be exercised when dealing with programming/download utilities so that device contents are not erroneously deleted or corrupted.
This is a free utility that is used for editing the registry to ensure the serial number descriptor of each FTDI device is ignored during driver installation. This feature ensures any FTDI device connected to a USB port is given the same COM port number.
FTD2XXST is an EEPROM serialiser and testing utility for FT232 and FT245 devices. FTD2XXST is based on our D2XX drivers and will work on Windows 98, ME, 2000 and XP platforms. The latest release supports the extra features of the FT232BM and FT245BM devices as well as the AM series devices.
DriverGuide maintains an extensive archive of Windows drivers available for free download. We employ a team from around the world which adds hundreds of new drivers to our site every day. How to Install Drivers Once you download your new driver, then you need to install it. To install a driver in Windows, you will need to use a built-in utility called Device Manager. It allows you to see all of the devices recognized by your system, and the drivers associated with them.
The Driver Update Utility automatically finds, downloads and installs the right driver for your hardware and operating system. It will Update all of your drivers in just a few clicks, and even backup your drivers before making any changes.
Part 2: Downloading and Installing the Computer SoftwareOnce your printer has been setup follow the instructions below for downloading and installing your printer, scanner, and fax driver depending on which model you have. In the illustrations below we used the imageCLASS MF729Cdw and Windows 7 64 bit. The screens may vary somewhat based on your selections and the browser you use.
1. Visit 2. Type your model name into the search box and select it from the list that appears. 3. Click the 'GO' button to get to the Drivers & Downloads page for your model.4. From the Drivers & Downloads Tab, Select your Operating System and Version from the provided drop-down menu.5. The most common driver to use will be listed in the Recommended Section. Click [SELECT] next to the driver you need as shown in the illustration above and then click [DOWNLOAD].6. Click [Run] to begin downloading and installing the driver software.7. Click [RUN] to install the software.8. Click [Next] on the Welcome to the Setup Wizard for the MF Drivers.9. Click [Yes] on the License Agreement.10. Select Network Connection (for Network Models.11. Click [Yes] to remove the firewall blocks set against this program.12. Select your Device from the Device List and click [Next].13. Select the Drivers to install and click [Next].14. Select the printer driver you want to install and click [Next]. The default is UFR II Printer Driver.15. Confirm the printer name and click [Next].16. Confirm the fax name and click [Next].17. Click [Start].Congratulations, your drivers are installed and you should be able to print, fax, and scan wirelessly now depending on your model.
Update - called back in. One hour wait but it was worth it. Got another tech named Cory who had me up and running in about 15 minutes. Two things additional things he tried. One - drop the all in one installer (in my case "MF731CMFDriverV5401W64usEN") into the root of your C drive (aka "C:\") and install from there with admin privileges through Windows explorer (right click/run as admin). Two - I think more importantly what did it. There is a program in the "misc" folder (whether you are in the x32 or x64 folder). The file is called, " UNINSTAL.exe" Yes it has one "L." Run that as admin. It should wipe out any traces of old files and registry entries from previous installs. Final thing to download as a bonus if you are using the scanner. Program is called, "[Windows 32bit & 64bit] MF Scan Utility Ver.1.9.0.0." You can download it from the software tab.
After one or more unsuccessful printer or driver install attempts, it possible for windows to retain incorrect settings, such as TCP/IP port or WSD information making these resources unavailable to the driver when it tries to install.
Thank you for the tips. I just spent 75 minutes on the phone with Canon support and the rep had no idea how to fix the problem. Wen't to print managment and removed any instances of Canon. Disabled firewall and antivirus. Tried installing with admin privileges (even though I already had them. Tried installing just the scanner driver. Same error every time with that all in one installer. Nothing helped.
The problem is that every time I try the install with the "all in one" program, I immediately get the above message (could not install print driver). After getting off with Canon support, I tried downloading just the print driver ("[Windows 64bit] Generic Plus UFR II Printer Driver V2.10") and it installs. I was able to print a test page.
Thanks Rick for showing me where to find the ports section. I don't remember from all the installs and uninstalls of the drivers, but at one point I would see the device listed but there was no way to select properties (I was looking to see if I could print a test page). Anyway, thanks again for your help. Do you work for Canon? If not, they should put you on the payroll.
2S1P PCI adapter is a PCI card for your computer. After installing the drivers, the card behaves as a standard 2xCOM port and parallel port-1xLPT. The card offers output RS232 DB9 Male to connect asynchronous I / O devices such as external modem, GSM modem, printer serial port, barcode reader, etc. and also standard parallel (LPT) port for connecting eg. Printers. The speed of the serial port is up to 56000 baud in asynchronous mode also allows use with applications in automation, monitoring and control of industrial processes. Technical specifications: Interface: PCI 2.3 specification Chipset: MosChip 9865 Port: 2x Serial RS232 DB9 type (Male) and 1 parallels the type DB25 (Female) UART: UART supports all types from 450 to 550 (fully programmable) Data transfer rate: up to 15Mb / s FIFO receiver / transmitter works with the data size of 256 bytes Support Standard Parallel Port (SPP), Enhanced Parallel (EPP)Bussines informationDiscomp s.r.o., +420 377 221 177, sales@discomp.cz 2ff7e9595c
Comments